Single Post Hydraulic Lift 3 t with 1850 mm Height for Mobile Use

The single-post format exists for flexibility. One column, one power unit, and a footprint small enough to move between positions. It suits tyre and brake work where the vehicle only needs to come up at one corner, and sites that cannot dedicate a permanent bay.

The rated capacity is 3 t, which is the working load the machine is designed for rather than a breaking load. Lifting height is 1850 mm, so the carriage stops at a working height you can stand under on most cars and light vans.

This model is rated 3 tonnes with 1850 mm of height. The single column carries the load centrally, so the base plate and the floor under it take the moment — the slab condition matters more here than on a two-post.

It is not a substitute for a two-post on general repair: the arms reach less far and the vehicle is not fully presented. Judge it by the job mix, not by the price.

One unit is the minimum order. The published band runs from USD 1,580 to USD 1,750 per unit depending on quantity; prices are USD, ex works, and exclude freight and destination duties. Payment is 30% by T/T to start production and 70% before shipment, and standard configurations typically leave the factory within seven working days of the deposit. The machine ships in export packing suitable for sea freight; packing dimensions and gross weight come with the quotation so your forwarder can price the container. Warranty is 12 months against manufacturing defects.

A level floor and a sound base are essential; the column is free-standing and stabilised by its base. Confirm the floor condition and the anchor specification before use.

Before you order

Before the order is confirmed, four site conditions decide whether the machine fits: the supply voltage and phase at the wall, the floor or slab that carries the load, the access width and turning space for the truck and the unloading equipment, and the clear height above the machine at full rise. Send those four with the enquiry and the quotation comes back with the right build the first time. If one of them is unknown, say so — we would rather ask twice than ship a machine that has to be modified on site.