In-Ground Scissor Lift 3.5 t with 3500 mm Lift for Flush-Floor Bays
FromUSD 964/ unit
Categories · 01
In-ground lifts
A flush-floor scissor lift for bays where a column in the middle of the workshop is not an option.
MOQ 1 unit · USD, ex works. Freight and destination duties quoted separately.
01 / Overview
In-ground lifts
An in-ground lift puts the mechanism below the slab, so the workshop floor stays clear. That matters in a bay that doubles as a wash area, a detailing bay or a drive-through, where a surface lift would block the route.
This model is rated 3.5 tonnes with a 3500 mm lift, which puts the vehicle at full standing height. The recess, the drainage and the foundation are the project; the machine is the easy part.
Because the mechanism sits in a recess, water ingress is the long-term risk. If the bay is washed, plan the pit drainage and the cover plates at the same time as the excavation, not afterwards.
Delivery and terms
Excavation, reinforced recess, drainage and a power route are needed before delivery. Send the floor drawing and we will confirm the recess dimensions against the model.
02 / Questions buyers ask
Questions buyers ask
Do I need to break the floor?
Yes. An in-ground lift requires a recess cast to the drawing, with drainage. That is civil work, not installation work.
What happens if water gets in?
The recess needs drainage and sealed covers. Plan it with the excavation; retrofitting drainage under a finished floor is expensive.
Can it be installed outdoors?
Not recommended without a covered, drained structure — the mechanism is designed for a dry recess.
What is the lifting height?
3500 mm on this model, enough for full standing work underneath.
Request a quotation
+86 152 6912 3488 · 316890415@qq.com