XINYUAN 4 t Scissor Alignment Bay, Double Cylinder

Not every product here is a 3D aligner. One is the measuring system; the other six are the platforms it stands on. Alignment is a measurement business: the machine reads the wheel planes and reports camber, caster and toe against the manufacturer specification. A 3D system with a dual screen lets the technician show the customer the before-and-after reading without turning the monitor.

The rated capacity is 4 t, which is the working load the machine is designed for rather than a breaking load. Lifting height is 1.8m, so the carriage stops at a working height you can stand under on most cars and light vans. At rest the machine sits 330 mm above the floor, the figure that decides whether a lowered car clears it without ramps.

This unit runs on 220 V with a 32-inch high-definition dual screen. It is supplied as the measuring system; the platform is a separate decision, and a four-post alignment lift is the usual partner.

The installation question is line of sight and floor flatness, not power. Targets must be visible from the camera bar at both screen positions, so plan the bay layout before the equipment arrives.

One unit is the minimum order. The published band runs from USD 3,199 to USD 3,499 per unit depending on quantity; prices are USD, ex works, and exclude freight and destination duties. Payment is 30% by T/T to start production and 70% before shipment, and standard configurations typically leave the factory within seven working days of the deposit. The machine ships in export packing suitable for sea freight; packing dimensions and gross weight come with the quotation so your forwarder can price the container. Warranty is 12 months against manufacturing defects.

220 V supply, a level floor and clear sight lines from the camera bar to the target positions. Confirm the platform height and the camera position together.

Before you order

Before the order is confirmed, four site conditions decide whether the machine fits: the supply voltage and phase at the wall, the floor or slab that carries the load, the access width and turning space for the truck and the unloading equipment, and the clear height above the machine at full rise. Send those four with the enquiry and the quotation comes back with the right build the first time. If one of them is unknown, say so — we would rather ask twice than ship a machine that has to be modified on site.